Use Bring your own SIP when your provider uses different inbound source IPs and outbound destinations, or when you need multiple outbound gateways. Inbound and outbound directions have separate settings and credentials.
Before you begin
You need the workspace permissions and SIP availability described in Connect with Voiceflow SIP, an agent to assign, and your provider’s trunk configuration.
Collect the public IPv4 source ranges for inbound calls. For outbound calls, collect the destination hostname or public IPv4 address, protocol, optional custom port and Caller ID. Obtain outbound digest credentials only if the provider requires them.
Connect your trunk
Choose Bring your own SIP
Open Phone numbers → Create number → SIP → Bring your own SIP. Enter a Name and enable Inbound calls, Outbound calls and transfers, or both. At least one direction must remain enabled.
Configure calls into Voiceflow
Under Inbound calls, choose IPs, Credentials or Both. Enter the provider’s public IPv4 addresses or ranges, and its SIP username and password when using digest authentication. Inbound hostname and IPv6 gateway addresses are not accepted. With Both, the source address and credentials must both match.
For an outbound-only trunk, turn Inbound calls off; do not add inbound addresses just to complete the form.
Configure calls to your provider
Under Outbound calls and transfers, add an Address for each destination, in failover order. Each row has Port and Protocol. Use a public IPv4 address or hostname, without a SIP scheme, path or embedded port. An empty Port saves as 5060 for UDP/TCP or 5061 for TLS.
Enter the outbound Username and Password together if your provider requires digest authentication. Otherwise leave both empty and configure the provider’s source-IP allowlist. Enter an E.164 Caller ID such as +14165550123.
The connection allows 10 addresses in total, counting both inbound IP rows and outbound destination rows. See gateway failover for the conditions that advance to another destination.
Enable encrypted audio when supported
Turn on Encrypted audio (SRTP) to require SRTP audio. The form switches outbound addresses to TLS and holds them there while encryption is on. Your provider must call Voiceflow over TLS on 5061 with SRTP. A TLS destination needs a certificate chain trusted by a public certificate authority.
Create, assign and route
Click Create, copy the SIP address, and assign the agent. Select its Environment and version in the connection settings, or use All environments for traffic-split routing.
For inbound calls, route the provider’s numbers to sip:<dialled-number>@<connection-sip-address> without SIP registration. All numbers on this connection use its assigned agent; they do not create per-number agent routes.
Verify the result
Test each enabled direction. For inbound, confirm the assigned agent answers and you hear audio both ways. For outbound, use the outbound API with a number or PBX extension you control and confirm that it rings and connects.
If you configured failover, use a controlled test destination to check a gateway-unavailable case. A busy or declined call intentionally does not advance to another gateway. Check the provider’s SIP logs and Transcripts.
Update the trunk
Open the connection to edit its addresses and credentials. Turning a direction off removes its saved configuration. A blank password field in an existing editor keeps the stored password; enter a new value to replace it. See connection maintenance.