Overview

Generate the staff panel for a Talkdesk Conversations Canvas. Every task uses a backend-authorized snapshot; record-aware launch is available when the card flow already has a verified case key.

Your team hosts the staff interface and case-access checks; Voiceflow runs the published read-only assistant. Tasks run only on a staff action. Automatic selection loads a snapshot, not a live transcript or a customer-send action.

Prepare the staff deployment

Collect the assistant, verified identity and platform configuration once.

Download the starter bundle. Keep support-platforms, contact-center-assist and amazon-connect as sibling directories. Shared agent-assist setup owns the host/session contracts; build the staff assistant before installing the platform entry.

Install the staff entry

Generate the platform files, connect authorized data and activate the pilot surface.

1

Build the platform files

From the extracted archive root, use your HTTPS staff origin without a path:

Build the Talkdesk staff app

Serve the generated panel.html, panel.css and panel.bundle.mjs together at https://staff.example/support-platforms/talkdesk/panel.html. The command also writes SETUP.md and the applicable platform artifacts. Keep credentials on the server. It refuses an existing output directory; append a new directory after the origin when rebuilding. Configure no-store, approved iframe ancestors and embedded SSO.

2

Connect the authorized case reader

Use the existing authenticated host with routes.mjs:

Mount both authorized staff routes

loadCaseForStaff(staff, id, {signal}) verifies the tenant, provider interaction/case mapping and permitted fields, then returns {id, context: approvedText} or null. It must not accept browser-posted context as evidence.

Mount the handler at both same-origin POST paths, /api/agent-assist and /api/agent-assist/context. Apply the host’s CSRF policy to both, a 32 KiB body limit, staff rate/concurrency limits and bounded identity/provider reads. Honor the supplied cancellation signal. The context route starts no Voiceflow session; every later task reauthorizes and reloads the record.

3

Activate the platform surface

In Workspace Designer → Cards → Create card, connect Card Trigger → Render Iframe and set its source to the generated panel URL. Allow only the scripts, forms and same-origin behavior needed by the host. Save/publish the card automation.

Place the card in a Panel, add that Panel to the intended Conversations Canvas, publish/install the Canvas and assign the pilot agents. A published card alone does not make it appear in Conversations. Open the Canvas tab and complete staff sign-in.

A fixed Render Iframe source does not expose current interaction events: enter the case ID and choose Load case context. Render Iframe also accepts a source variable. If your card flow already supplies a verified opaque CRM case key, use the optional launch build below and construct its full URL with #case=<encoded ID> in that variable. Select it as source and prove it changes for the intended interaction. No undocumented global interaction_id variable is assumed.

4

Load context and choose a task

Enter the current authorized case ID and choose Load case context. Wait for Case context ready and inspect Approved case context. Denial keeps tasks disabled. Opening a record or loading context does not ask the model.

Choose Find policy, Draft reply, Suggest next step or Summarize. The question box is optional for these four actions; use it to focus the result. Ask assistant requires a question. Configure the assistant to return customer wording only for Draft reply and staff evidence/missing facts for the other tasks. Review model output before using it.

Use an already verified record-aware launch

Enable this only when the existing platform flow supplies a stable opaque case key.

After the administrator proves the exact field/variable and server mapping, build with an options file containing {"launchSelection":true}:

Build the optional pinned launch

Configure the source/link as the generated URL plus #case=<URL-encoded verified ID>. Opening it loads authorized context automatically; an unresolved variable leaves tasks disabled. The external/iframe launch remains pinned to that ID, with no undocumented background event feed.

Configure case context

Treat workspace IDs as selection hints and keep approved data on the server.

The default build checks a manually selected case and disables tasks after an ID edit. The optional source-variable launch selects its record on URL load/hash change; it is not a Talkdesk event SDK or a live transcript listener. Your server still checks the staff account and case mapping. Clear/finish the old case and test actual card/Canvas recreation when interactions change.

Use Copy suggestion only after the complete result arrives, then review/edit it in the normal support workspace. This supplied surface has no verified draft-composer insertion action. A provider endpoint that sends a message or saves a note is not used as a substitute.

The host must reset/unload on logout and account changes. Browser abort stops consumption; it does not prove remote execution stopped or transcripts were deleted. Set expiry and retention with the owning teams. A snapshot above the starter’s 16,000-code-unit limit is rejected; narrow the approved fields instead of silently dropping conversation coverage.

Test the staff workflow

Check tasks, record changes, denial and the exact human delivery action.

1

Check the selected record and all four tasks

Use a sandbox case with an unopened item delivered 12 days ago and an approved 30-day policy. Confirm the visible record ID and approved snapshot. Run every task with an empty question, then add a focus. Verify policy conditions, missing facts and source references. Summaries must state gaps when the snapshot is metadata or a limited excerpt rather than a complete interaction.

2

Prove record isolation and access denial

Launch a second record and confirm its ID/context replace the first in that new launch. Existing companion tabs remain pinned to their original record; finish/close them deliberately. For manual selection, edit the ID mid-response and prove tasks stay disabled until the next context load succeeds. Use a second staff account for a denied record: no snapshot/answer may appear and no model request may start. Test logout, account switch and session expiry.

3

Review delivery and recover from failure

Copy one completed suggestion and review it in the normal composer. No provider send, saved note, refund or call-control request may occur. Verify a partial stream never enables Copy suggestion. Interrupt the stream and deny the provider read; the prior/partial result must clear. Restore the service and retry manually while keeping the normal support workspace usable.

The entry or context does not load

Check platform assignment, direct origins and staff/provider access.

Verify the generated URL/artifacts, platform assignment and embedded sign-in. For parent messaging, verify both the direct source window and configured HTTPS origin; never use a wildcard. A 401 requires sign-in; 403 requires CSRF/tenant/record checks; 413 needs a narrower approved snapshot. Inspect redacted server diagnostics for provider/runtime failure. Reopen/reload after recovery without exposing the staff service publicly.

The result belongs to an old record

Check whether this surface follows selection or opens a pinned companion.

Compare the visible ID with the workspace. For a pinned launch, open a new launcher for the current record; a separate tab cannot follow the original workspace. For SDK/property binding, repeat the switch during the pending response and check the direct parent/SDK events and generation guard. Do not rely on a network abort alone. Discard an uncertain result before continuing.

Release and maintain assistance

Record the accepted app, permissions and rollback before expanding access.

1

Release to the pilot staff

Record the staff-host build, provider field allowlist/mapping, platform configuration and Voiceflow Environment/release. Repeat allowed/denied cases through the actual installed entry with a fresh staff session. Assign owners for policy freshness, identity/token lifecycle, SDK/app updates and incidents; rerun quality evaluation after changes.

2

Restore the reviewed deployment

Restore the saved Canvas/Panel configuration or remove the assistant card from the pilot Panel and publish. Restore the recorded staff-host build and reviewed Voiceflow release, then repeat a fresh-session check.

Local review uses the starter’s labelled fictional fixtures; no SDK fixture or successful bundle proves provider installation, SSO, account permissions or real-model quality. Complete sandbox acceptance for this exact surface before release. For business-system tools, Import help articles and Human agent hand-off, keep the canonical Integration manuals.

Use the up and down arrow keys to select a result, Enter to open it, and Escape to close the search.