Transfer calls from your agent to a live representative or another phone number.

Overview

This feature is only available on phone projects.

Call forward step with a destination phone number
Transfer a phone conversation to another number with a Call forward step.

The Call forward step lets you hand off active phone conversations to real people or other phone systems. When your agent reaches this step during a call, it transfers the caller to the phone number you specify, creating a smooth transition from AI to human support or other automated systems.

Using the Call forward step

Drag the Call forward step into a workflow and connect it to the step before it.

Drag the Call forward step into a workflow and connect it to the step before it. Click on the step to configure where calls should be forwarded.

Configuration

The Call forward step requires a phone number and supports optional extensions:

  • Phone number: Enter the destination phone number in international format (eg: +1234567890). You can forward to standard phone numbers, international numbers, or SIP addresses.
  • Extension: Add an extension to navigate phone menus after the call connects. This uses DTMF tones to automatically bypass IVR systems and enter menu options or extensions. The syntax depends on your telephony provider:
    • Twilio: Use w for a 0.5 second pause or W for a 1 second pause between digits. Example: 1W23 presses 1, waits 1 second, then presses 2 and 3.
    • Vonage: Use p for a 0.5 second pause between digits. Example: 1pp23 presses 1, waits 1 second, then presses 2 and 3.
  • Telnyx and Voiceflow-provisioned numbers: the current phone-transfer consumer does not send a separate extension field. Use a directly reachable destination or a verified SIP route.
  • CallerID passthrough: On forwarded inbound calls, show the original caller’s number as the caller ID instead of the agent’s number.

    Note: Vonage uses the original caller only when the caller, connected Vonage number and transfer destination share a country; otherwise it uses the connected number.

    • Inbound: When caller A reaches agent B and the call forwards to C, C normally sees the call from B. With passthrough on, C sees A’s phone number instead.
    • Outbound: When agent B calls user A and forwards to C, C always sees B - passthrough has no effect here. This is a carrier regulatory restriction.

Forwarding calls that came in over SIP

On calls that reach your agent through a SIP connection, forwarding to a SIP address hands the call back to your phone system with a SIP REFER.

On calls that reach your agent through a SIP connection, forwarding to a SIP address hands the call back to your phone system with a SIP REFER. Your phone system then connects the caller to the destination, so it must accept REFER requests. If the transfer is rejected, the call ends.

Use the up and down arrow keys to select a result, Enter to open it, and Escape to close the search.