For a custom application, use Build a browser voice client. For an existing PBX or contact centre, use Connect with SIP.

Before you begin

  • A voice agent with instructions for one task, such as checking an order.
  • Access to manage phone numbers and edit the agent.
  • A test phone and a number that does not serve real customers.

Place and review the call

1

Connect a test number

Open Phone numbers → Create number. Provision a Voiceflow number or enter the credentials for your Twilio, Vonage or Telnyx number. Assign it to this agent. Provider setup lists the required credentials.

2

Route it to your test draft

In the number’s Environment selector, select your test Environment and Draft. An explicit assignment overrides traffic splitting for this number.

Phone numbers Environment selector
Point a test number at the Environment you are changing.
3

Choose the voice

Open Behaviour → Voice output and choose the default voice. Set the recognizer’s language in Voice input for your test caller.

Select the voice before placing your test call. Photo:
4

Call the number

Dial from your test phone. Ask the agent to complete the task, then interrupt a spoken reply and pause before finishing another request. Confirm you can hear the agent and it can hear you.

5

Inspect the conversation

After hanging up, open Transcripts and locate the call by time and caller. Read the exchange and inspect tool results. Review voice calls covers recordings and scoring.

Verify the result

The correct draft answers; both sides can hear each other; the intended task and tool result appear in the Transcript. A successful text test alone does not establish any of these audio checks.

If the call fails

If the wrong version answers, check the number’s explicit Environment assignment. For missing audio or a rejected call, follow Voice troubleshooting. Keep customer-facing numbers on Published.

Use the up and down arrow keys to select a result, Enter to open it, and Escape to close the search.